Tomcat SSL/TLS en Java Keystore en TrustStore Configuratie voor Linux en Windows Hosts

Leer hoe u efficiënt SSL/TLS-certificaten, Java KeyStores en Java Truststores beheert en instelt met behulp van Ansible. Deze handleiding bevat stappen voor het integreren van zowel automatisch gegenereerde als extern verkregen certificaten.
Categories:
Tags:

  19 minuten leestijd , 11 minuten provision

Projecten: c2platform/rws/ansible-gis, c2platform.core, c2platform.mw, c2platform.gis

Overzicht

Deze tutorial demonstreert het opzetten van twee Tomcat-nodes – een op Ubuntu 22 en een op Windows Server 2022 – voor SSL en Java TrustStore configuratie. Deze handleiding kan in principe worden gebruikt om de RWS-aanpak te valideren voor een eenvoudige Ansible-gebaseerde CA-serverbenadering zoals gedocumenteerd in Implementatie van PKI voor RWS GIS met Ansible.

Met behulp van Vagrant en Ansible zullen de volgende dingen worden uitgevoerd:

  1. Vagrant creëert twee nodes: een LXD-box die Ubuntu 22 draait en een VirtualBox VM met Windows Server 2022.
  2. Vagrant initieert de Ansible provisioner.
  3. Ansible installeert Tomcat op beide nodes met behulp van verschillende rollen.
    1. Voor Linux wordt de rol c2platform.mw.tomcat gebruikt om apache-tomcat-9.0.87.tar.gz  te downloaden en uit te pakken en configureert vervolgens Tomcat.
    2. Voor Windows wordt c2platform.gis.tomcat gebruikt, die apache-tomcat-9.0.78.exe  downloadt en gebruikt voor de installatie van Tomcat op MS Windows.
    3. Beide rollen omvatten de c2platform.core.cacerts rol voor de generatie van SSL/TLS-certificaten, het maken van een Java KeyStore en het bijwerken van Java TrustStore met het CA rootcertificaat.
NodeOSDistributieProvider
gsd-tomcat1LinuxUbuntu 22LXD
gsd-tomcat2WindowsWindows Server 2022VirtualBox

Vereisten

Voordat u verder gaat, zorg ervoor dat u de stappen hebt voltooid voor het Instellen van de RWS Ontwikkelomgeving op Ubuntu 22 en dat de reverse proxy actief is

vagrant up gsd-rproxy1

In de RWS Ontwikkelomgeving heeft de Reverse Proxy gsd-rproxy1 ook een secundaire functie als de CA-server. Deze setup speelt een cruciale rol bij het beheren en distribueren van certificaten en Java Keystores / TrustStores.

Installatie

Om de Tomcat-nodes gsd-tomcat1 en gsd-tomcat2 te initialiseren, voert u het onderstaande commando uit. Het provisioning-proces duurt naar verwachting ongeveer 11 minuten om te voltooien.

vagrant up gsd-tomcat1 gsd-tomcat2

Verificatie

Als Vagrant de twee nodes succesvol heeft kunnen voorzien, zonder fouten, kan je controleren of alles correct werkt met de volgende stappen.

SSL/TLS Configuratie

Start FireFox met je FireFox-profiel (zie Configureer een FireFox-profiel) en je zou naar de onderstaande links moeten kunnen navigeren en de “Hello World”-applicatie moeten zien. Er zouden geen SSL/TLS-certificaat foutmeldingen moeten verschijnen.

  1. https://gsd-tomcat1.internal.c2platform.org:8443/helloworld/ 
  2. https://gsd-tomcat2.internal.c2platform.org:8443/helloworld/ 

Hiermee heeft u geverifieerd dat de Tomcat SSL/TLS-configuratie door Ansible op gsd-tomcat1 en gsd-tomcat2 correct is uitgevoerd.

Navigeer naar de onderstaande links. Je zou dezelfde berichten moeten zien.

  1. https://helloworld.c2platform.org/ 
  2. https://helloworld2.c2platform.org/ 

Dit bevestigt dat je ook toegang hebt tot de Tomcat-diensten die draaien op gsd-tomcat1 en gsd-tomcat2 via de reverse proxy server gsd-rproxy1.

TrustStore

Ansible werkt ook de Java TrustStore op gsd-tomcat1 en gsd-tomcat2 bij met het CA rootcertificaat. Wat je kunt verifiëren, werkt correct door gebruik te maken van een aangepaste Java-testklasse HttpsConnectionTest. Voer de volgende opdrachten uit om de Java TrustStore op gsd-tomcat1 te verifiëren:

  1. Ga met SSH de node binnen:

    vagrant ssh gds-tomcat1

  2. Vanuit de directory /vagrant/scripts/gsd-tomcat voer je de HttpsConnectionTest uit:

    cd /vagrant/scripts/gsd-tomcat
bash test-https.sh
    Toon me
    vagrant@gsd-tomcat1:/vagrant/scripts/gsd-tomcat$ bash test-https.sh
google, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 98:2D:C0:52:3D:84:7D:B5:89:AE:22:3E:DD:D8:37:86:72:79:D7:32:40:D6:03:55:D8:A6:F1:70:53:DF:48:95
c2-ca, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 64:1B:BC:79:EE:0A:37:EA:3D:AC:B9:E3:E5:7F:02:71:3E:7D:C8:82:89:62:C5:E8:11:75:45:37:58:18:71:6F
Response Code: 200
Response Message: OK
Response Code: 200
Response Message: OK
Response Code: 200
Response Message: null
vagrant@gsd-tomcat1:/vagrant/scripts/gsd-tomcat$

Om hetzelfde op gsd-tomcat2 te verifiëren, voer je de volgende opdrachten uit:

  1. Ga met SSH de node binnen:

    vagrant ssh gds-tomcat2

  2. Vanuit de directory C:/vagrant/scripts/gsd-tomcat voer je de HttpsConnectionTest uit:

    cd /vagrant/scripts/gsd-tomcat
test-https.bat
    Toon me
    vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>test-https.bat

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>set JAVA_HOME=D:\Apps\jdk-17.0.5\jdk-17.0.5+8

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>set PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\ProgramData\chocolatey\bin;C:\Program Files\PowerShell\7\;C:\Program Files\OpenSSH;C:\Program Files\Git\cmd;C:\Users\vagrant\AppData\Local\Microsoft\WindowsApps;;D:\Apps\jdk-17.0.5\jdk-17.0.5+8\bin;D:\Apps\jdk-17.0.5\jdk-17.0.5+8\bin

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>keytool -list -cacerts -storepass changeit -alias google
google, Mar 20, 2024, trustedCertEntry,
Certificate fingerprint (SHA-256): 47:19:35:3D:CE:E0:3D:17:BD:60:C2:28:71:84:03:CD:2F:9F:81:EE:06:C8:A6:63:23:4E:56:95:15:8C:19:C6

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>keytool -list -cacerts -storepass changeit -alias c2-ca
c2-ca, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 64:1B:BC:79:EE:0A:37:EA:3D:AC:B9:E3:E5:7F:02:71:3E:7D:C8:82:89:62:C5:E8:11:75:45:37:58:18:71:6F

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>javac HttpsConnectionTest.java

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>java HttpsConnectionTest https://www.google.nl
Response Code: 200
Response Message: OK

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>java HttpsConnectionTest https://c2platform.org
Response Code: 200
Response Message: OK

vagrant@GSD-TOMCAT2 C:\vagrant\scripts\gsd-tomcat>java HttpsConnectionTest https://gsd-tomcat2.internal.c2platform.org:8443/helloworld/
Response Code: 200
Response Message: null

Alternatief, voor gsd-tomcat2, aangezien dit een Windows-node is, kunt u ook een RDP-verbinding gebruiken:

  1. Start RDP-verbinding naar 1.1.8.207 login als vagrant met wachtwoord vagrant

  2. Gebruik de Windows Command Prompt shortcut op het bureaublad genaamd Scripts en voer het script test-https.bat uit. Hiermee wordt een eenvoudige Java-testklasse gecompileerd die vervolgens wordt gebruikt om te controleren of de Java TrustStore correct is bijgewerkt met het CA-certificaat. Als je dit script uitvoert, mogen er geen foutmeldingen verschijnen en alleen een response code van 200 die succes aangeeft.

    Toon me
    c:\vagrant\scripts\gsd-tomcat>test-https.bat

c:\vagrant\scripts\gsd-tomcat>set JAVA_HOME=D:\Apps\jdk-17.0.5\jdk-17.0.5+8

c:\vagrant\scripts\gsd-tomcat>set PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\OpenSSH\;C:\ProgramData\chocolatey\bin;C:\Program Files\PowerShell\7\;C:\Program Files\OpenSSH;C:\Program Files\Git\cmd;%USERPROFILE%\AppData\Local\Microsoft\WindowsApps;%JAVA_HOME%\bin;D:\Apps\jdk-17.0.5\jdk-17.0.5+8\bin;D:\Apps\jdk-17.0.5\jdk-17.0.5+8\bin;D:\Apps\jdk-17.0.5\jdk-17.0.5+8\bin

c:\vagrant\scripts\gsd-tomcat>keytool -list -cacerts -storepass changeit -alias google
google, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 98:2D:C0:52:3D:84:7D:B5:89:AE:22:3E:DD:D8:37:86:72:79:D7:32:40:D6:03:55:D8:A6:F1:70:53:DF:48:95

c:\vagrant\scripts\gsd-tomcat>keytool -list -cacerts -storepass changeit -alias c2-ca
c2-ca, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 64:1B:BC:79:EE:0A:37:EA:3D:AC:B9:E3:E5:7F:02:71:3E:7D:C8:82:89:62:C5:E8:11:75:45:37:58:18:71:6F

c:\vagrant\scripts\gsd-tomcat>javac HttpsConnectionTest.java

c:\vagrant\scripts\gsd-tomcat>java HttpsConnectionTest https://www.google.nl
Response Code: 200
Response Message: OK

c:\vagrant\scripts\gsd-tomcat>java HttpsConnectionTest https://c2platform.org
Response Code: 200
Response Message: OK

c:\vagrant\scripts\gsd-tomcat>java HttpsConnectionTest https://gsd-tomcat2.internal.c2platform.org:8443/helloworld/
Response Code: 200
Response Message: null

c:\vagrant\scripts\gsd-tomcat>

Herzien

Met betrekking tot de Tomcat-nodes gsd-tomcat1, gsd-tomcat2 en de CA-server gsd-rproxy1 let op de volgende bestanden.

NodeProjectSpeelBestand
gsd-rproxy1GIS Platformplays/mgmt/cacerts_server.ymlgroup_vars/all/certs.yml
gsd-tomcat1GIS Platformplays/mw/tomcat.ymlgroup_vars/tomcat_linux/certs.yml
gsd-tomcat2GIS Platformplays/mw/tomcat.ymlgroup_vars/tomcat_win/certs.yml

Node gsd-tomcat1

Voor node gsd-tomcat1 is de configuratie group_vars/tomcat_linux/certs.yml

---
tomcat_cacerts2_certificates:
  - common_name: "{{ inventory_hostname }}"  # alias
    country_name: NL
    locality_name: Den Haag
    organization_name: C2
    organizational_unit_name: C2 GIS Platform Team
    state_or_province_name: Zuid-Holland
    subject_alt_name:
      - "DNS:{{ inventory_hostname }}"
      - "DNS:{{ inventory_hostname }}.internal.c2platform.org"
      - "IP:{{ ansible_eth1.ipv4.address }}"
    ansible_group: tomcat
    deploy:
      keystore:
        dir: "{{ tomcat_home_version }}/conf"
        password: geheim
        owner: "{{ tomcat_user }}"
        group: "{{ tomcat_group }}"
        notify: herstart tomcat instance
      truststore:
        dest: "{{ java_version | c2platform.core.java_home }}/lib/security/cacerts"
        sites:
          - name: www.google.com
            port: 443
            alias: google

Deze configuratie resulteert in de creatie van een bestand met de naam gsd-tomcat1-gsd-tomcat1.keystore op de CA-server gsd-rproxy1.

vagrant@gsd-rproxy1:~$ ls /vagrant/.ca/c2/tomcat/ | grep tomcat1
gsd-tomcat1-gsd-tomcat1.crt
gsd-tomcat1-gsd-tomcat1.csr
gsd-tomcat1-gsd-tomcat1.key
gsd-tomcat1-gsd-tomcat1.keystore
gsd-tomcat1-gsd-tomcat1.p12
gsd-tomcat1-gsd-tomcat1.pem
gsd-tomcat1-gsd-tomcat1.truststore

Dit bestand wordt vervolgens gedistribueerd naar de gsd-tomcat1 node, zoals blijkt uit de volgende directorylijst:

root@gsd-tomcat1:~# ls /opt/tomcat/tomcat/conf/
Catalina             gsd-tomcat1-gsd-tomcat1.keystore  jmxremote.password  tomcat-users.xsd
catalina.policy      jaspic-providers.xml              logging.properties  web.xml
catalina.properties  jaspic-providers.xsd              server.xml
context.xml          jmxremote.access                  tomcat-users.xml
root@gsd-tomcat1:~#

Deze configuratie werkt ook de Java TrustStore bij / beheert deze. Met behulp van keytool kunt u verifiëren dat het certificaat van ttps://www.google.com:443  en het C2 Root CA-certificaat is geïmporteerd in de Java TrustStore.

keytool -list -cacerts -storepass changeit -alias google
keytool -list -cacerts -storepass changeit -alias c2-ca
Toon me
root@gsd-tomcat1:~# keytool -list -cacerts -storepass changeit -alias google
google, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 98:2D:C0:52:3D:84:7D:B5:89:AE:22:3E:DD:D8:37:86:72:79:D7:32:40:D6:03:55:D8:A6:F1:70:53:DF:48:95
root@gsd-tomcat1:~# keytool -list -cacerts -storepass changeit -alias c2-ca
c2-ca, Dec 14, 2023, trustedCertEntry,
Certificate fingerprint (SHA-256): 64:1B:BC:79:EE:0A:37:EA:3D:AC:B9:E3:E5:7F:02:71:3E:7D:C8:82:89:62:C5:E8:11:75:45:37:58:18:71:6F
root@gsd-tomcat1:~#

Node gsd-tomcat2

Voor node gsd-tomcat2 is de configuratie group_vars/tomcat_win/certs.yml

tomcat_cacerts2_certificates:
  - common_name: "{{ inventory_hostname }}"  # alias
    country_name: NL
    locality_name: Den Haag
    organization_name: C2
    organizational_unit_name: C2 GIS Platform Team
    state_or_province_name: Zuid-Holland
    subject_alt_name:
      - "DNS:{{ inventory_hostname }}"
      - "DNS:{{ inventory_hostname }}.internal.c2platform.org"
      - "DNS:{{ inventory_hostname }}.ad.c2platform.org"
      - "IP:{{ ansible_host }}"
    ansible_group: tomcat
    deploy:
      keystore:
        dir: "{{ tomcat_home }}/conf"
        password: geheim
        notify: Herstart Tomcat-service
      truststore:
        dest: "{{ java_install_dir }}/jdk-17.0.5+8/lib/security/cacerts"
        sites:
          - name: www.google.com
            port: 443
            alias: google

Deze configuratie resulteert in de creatie van een bestand met de naam gsd-tomcat2-GSD-TOMCAT2.keystore op de CA-server gsd-rproxy1.

Toon me
root@gsd-rproxy1:~# ls /vagrant/.ca/c2/tomcat/ | grep tomcat2
gsd-tomcat2-GSD-TOMCAT2.crt
gsd-tomcat2-GSD-TOMCAT2.csr
gsd-tomcat2-GSD-TOMCAT2.key
gsd-tomcat2-GSD-TOMCAT2.keystore
gsd-tomcat2-GSD-TOMCAT2.p12
gsd-tomcat2-GSD-TOMCAT2.pem
gsd-tomcat2-GSD-TOMCAT2.truststore
root@gsd-rproxy1:~#

Dit wordt geïmplementeerd naar de directory d:\Apps\tomcat\conf op gsd-tomcat2.

Toon me
Microsoft Windows [Version 10.0.20348.707]
(c) Microsoft Corporation. Alle rechten voorbehouden.

vagrant@GSD-TOMCAT2 C:\Users\vagrant>dir d:\Apps\tomcat\conf
 Volume in drive D is Data
 Volume Serial Number is DCAD-2354

 Directory of d:\Apps\tomcat\conf

12/15/2023  03:15 AM    <DIR>          .
12/15/2023  03:14 AM    <DIR>          ..
12/15/2023  03:15 AM    <DIR>          Catalina
07/04/2023  01:15 PM            13,216 catalina.policy
07/04/2023  01:15 PM             7,849 catalina.properties
07/04/2023  01:15 PM             1,431 context.xml
12/15/2023  03:15 AM             4,530 gsd-tomcat2-GSD-TOMCAT2.keystore
07/04/2023  01:15 PM             1,172 jaspic-providers.xml
07/04/2023  01:15 PM             2,365 jaspic-providers.xsd
07/04/2023  01:15 PM             4,223 logging.properties
12/15/2023  03:15 AM             2,508 server.xml
12/15/2023  03:14 AM             8,034 server.xml.3200.20231215-031501.bak
12/15/2023  03:14 AM             2,813 tomcat-users.xml
07/04/2023  01:15 PM             2,617 tomcat-users.xsd
07/04/2023  01:15 PM           177,316 web.xml
              12 File(s)        228,074 bytes
               3 Dir(s)  321,481,920,512 bytes free

vagrant@GSD-TOMCAT2 C:\Users\vagrant>

RWS Certificaat Implementeren

In deze sectie gaan we de implementatie van een officieel / extern RWS-certificaat simuleren.

  1. Zoek en sla de vingerafdruk van het huidige certificaat op:

    vagrant ssh gsd-tomcat1

    echo -n | openssl s_client -connect gsd-tomcat1.internal.c2platform.org:8443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' > /tmp/gsd-tomcat1.pem
openssl x509 -noout -fingerprint -sha256 -inform pem -in /tmp/gsd-tomcat1.pem
    Toon me
    vagrant@gsd-tomcat1:~$ echo -n | openssl s_client -connect gsd-tomcat1.internal.c2platform.org:8443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' > /tmp/gsd-tomcat1.pem
depth=1 CN = c2
verify return:1
depth=0 C = NL, ST = Zuid-Holland, L = Den Haag, O = C2, OU = C2 GIS Platform Team, CN = gsd-tomcat1
verify return:1
DONE
vagrant@gsd-tomcat1:~$ openssl x509 -noout -fingerprint -sha256 -inform pem -in /tmp/gsd-tomcat1.pem
sha256 Fingerprint=7B:63:B1:A0:F8:DC:CA:6F:14:92:A8:F5:A1:43:92:DD:1D:44:8F:90:BE:77:E4:96:08:D4:A7:84:F9:3D:23:05
vagrant@gsd-tomcat1:~$

  2. We gaan het zelfondertekende certificaat gsd-tomcat1-gsd-tomcat1.crt verwijderen door het te hernoemen naar gsd-tomcat1-gsd-tomcat1.crt.saved. In latere tests behandelen we het als een certificaat van een externe CSP. Voer op de host in de root van het project uit:

    sudo chown $USER:$USER .ca/c2/tomcat/*
sudo mv .ca/c2/tomcat/gsd-tomcat1-gsd-tomcat1.crt .ca/c2/tomcat/gsd-tomcat1-gsd-tomcat1.crt.saved

    Provision gsd-tomcat1

    vagrant provision gsd-tomcat1 | tee provision.log

    Controleer het provision.log-bestand waar u zou moeten zien dat een nieuw SSL/TLS-certificaat, een nieuwe Java KeyStore zijn gemaakt en gedistribueerd, en dat deze wijzigingen een herstart van de Tomcat-services triggerden. Als je de opdrachten uitvoert om de vingerafdruk te controleren, zou je nu een andere waarde moeten zien. Dit geeft aan dat de Tomcat-service inderdaad een ander certificaat gebruikt.

    Toon me
    ==> gsd-tomcat1: Running provisioner: shell...
    gsd-tomcat1: Running: inline script
==> gsd-tomcat1: Running provisioner: ansible...
    gsd-tomcat1: Running ansible-playbook...
[DEPRECATION WARNING]: "include" is deprecated, use include_tasks/import_tasks
instead. See https://docs.ansible.com/ansible-
core/2.15/user_guide/playbooks_reuse_includes.html for details. This feature
will be removed in version 2.16. Deprecation warnings can be disabled by
setting deprecation_warnings=False in ansible.cfg.

PLAY [Tomcat] ******************************************************************

TASK [Gathering Facts] *********************************************************
ok: [gsd-tomcat1]

TASK [c2platform.core.server_update : include_tasks] ***************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/server_update/tasks/update_cache.yml for gsd-tomcat1

TASK [c2platform.core.server_update : Apt update cache] ************************
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : include_tasks] *******************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=python3-pip)
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=upgrade pip and setuptools)
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=['setuptools', 'pyOpenSSL==22.0.0', 'psycopg2-binary', 'lxml', 'cryptography==38.0.4'])
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=['nano', 'wget', 'tree', 'unzip', 'zip', 'jq', 'build-essential', 'python3-dev', 'python3-wheel', 'libsasl2-dev', 'libldap2-dev', 'libssl-dev', 'git', 'nfs-common', 'net-tools', 'telnet', 'curl', 'dnsutils', 'python2'])

TASK [c2platform.core.bootstrap : OS package] **********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : Custom command upgrade pip and setuptools] ***
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : PIP package] *********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : OS package] **********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.os_trusts : CA distribute ( Debian )] ********************
ok: [gsd-tomcat1] => (item=https://letsencrypt.org/certs/isrgrootx1.pem)
ok: [gsd-tomcat1] => (item=file:///vagrant/.ca/c2/c2.crt)

TASK [c2platform.core.secrets : Stat secret dir] *******************************
ok: [gsd-tomcat1 -> localhost] => (item=/home/ostraaten/git/gitlab/c2/ansible-gis/secret_vars/development)
ok: [gsd-tomcat1 -> localhost] => (item=/runner/project/secret_vars/development)

TASK [c2platform.core.secrets : Include secrets] *******************************
ok: [gsd-tomcat1] => (item=/home/ostraaten/git/gitlab/c2/ansible-gis/secret_vars/development)

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files.yml for gsd-tomcat1 => (item=marker)

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files_src.yml for gsd-tomcat1

TASK [c2platform.core.files : Link] ********************************************
ok: [gsd-tomcat1] => (item=/usr/bin/python → /usr/bin/python2)

TASK [c2platform.core.files : Lineinfile] **************************************
ok: [gsd-tomcat1] => (item=/home/vagrant/.bashrc)
ok: [gsd-tomcat1] => (item=/root/.bashrc)

TASK [c2platform.core.lcm : Ansible roles names without prefix] ****************
ok: [gsd-tomcat1]

TASK [c2platform.core.lcm : lcm_roles_node] ************************************
ok: [gsd-tomcat1]

TASK [c2platform.core.lvm : Get disks] *****************************************
ok: [gsd-tomcat1]

TASK [c2platform.core.lvm : Get usable devices] ********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.lvm : Get nodes lvm roles] *******************************
ok: [gsd-tomcat1]

TASK [c2platform.core.hosts : Set up /etc/hostname.] ***************************
ok: [gsd-tomcat1] => (item=/home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/hosts/templates/../templates/hostname.j2)

TASK [c2platform.core.hosts : Set up /etc/hosts.] ******************************
ok: [gsd-tomcat1] => (item=/home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/hosts/templates/../templates/hosts.j2)

TASK [c2platform.core.alias : Set fact node roles] *****************************
ok: [gsd-tomcat1]

TASK [c2platform.core.common : Remove custom prompt] ***************************
ok: [gsd-tomcat1]

TASK [Include role(s)] *********************************************************

TASK [c2platform.core.java : Set additional java facts] ************************
ok: [gsd-tomcat1]

TASK [c2platform.core.java : Install Java] *************************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/java/tasks/install.yml for gsd-tomcat1 => (item=jdk17)

TASK [c2platform.core.java : Check installed] **********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.java : Create etc profile] *******************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : test if tomcat_versions is set correctly] *********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_home is set correctly] *************
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_version is set correctly] **********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_user is set correctly] *************
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_group is set correctly] ************
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_catalina_opts is set correctly] ****
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_non_ssl_connector_port is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_ssl_connector_port is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_shutdown_port is set correctly] ****
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_ajp_port is set correctly] *********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if port collisions occur is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_jre_home is set correctly] *********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_service_state is set correctly] ****
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_service_enabled is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_address is set correctly] **********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_enabled is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_directory is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_prefix is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_suffix is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_pattern is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : Group] ********************************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : User] *********************************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Home directory] ***********************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Create home link] *********************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Stat bin dir] *************************************
ok: [gsd-tomcat1]

TASK [Include certs tasks] *****************************************************

TASK [c2platform.core.cacerts2 : Set fact cacerts2_certificates] ***************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : cacerts2_certificates] ************************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : Set various certificate facts] ****************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : Set fact cacerts2_certificates] ***************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : include_tasks] ********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/certs_group.yml for gsd-tomcat1

TASK [c2platform.core.cacerts2 : include_tasks] ********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/cert.yml for gsd-tomcat1 => (item=gsd-tomcat1)

TASK [c2platform.core.cacerts2 : Stat key] *************************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Stat crt] *************************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Stat dir] *************************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate an OpenSSL private key] **************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate an OpenSSL Certificate Signing Request] ***
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate an OpenSSL certificate] **************
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate pkcs12 file] *************************
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Include Java KeyStore tasks] ******************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/java_keystore.yml for gsd-tomcat1

TASK [c2platform.core.cacerts2 : Stat KeyStore] ********************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Manage Java KeyStore] *************************
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Create PEM file] ******************************
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : include_tasks] ********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/cert_deploy.yml for gsd-tomcat1 => (item=gsd-tomcat1)

TASK [c2platform.core.cacerts2 : Copy to control node ( fetch )] ***************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)] => (item=key)
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)] => (item=crt)
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)] => (item=keystore)

TASK [c2platform.core.cacerts2 : Stat parent dir] ******************************
ok: [gsd-tomcat1] => (item=key)
ok: [gsd-tomcat1] => (item=crt)
ok: [gsd-tomcat1] => (item=keystore)

TASK [c2platform.core.cacerts2 : Copy file] ************************************
ok: [gsd-tomcat1] => (item=key)
changed: [gsd-tomcat1] => (item=crt)
changed: [gsd-tomcat1] => (item=keystore)

TASK [c2platform.mw.tomcat : Configure conf/server.xml] ************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Configure conf/tomcat-users.xml] ******************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Configure bin/setenv.sh] **************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Stat manager] *************************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Configure webapps/manager/META-INF/context.xml] ***
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Properties folder] ********************************
ok: [gsd-tomcat1] => (item=/opt/tomcat/tomcat/conf)

TASK [c2platform.mw.tomcat : Deploy WAR] ***************************************
ok: [gsd-tomcat1] => (item=https://github.com/aeimer/java-example-helloworld-war/raw/master/dist/helloworld.war → helloworld.war)

TASK [Files] *******************************************************************

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files.yml for gsd-tomcat1 => (item=jmx)

TASK [c2platform.core.files : Stat no update files] ****************************
ok: [gsd-tomcat1] => (item=/opt/tomcat/tomcat/conf/jmxremote.password)

TASK [c2platform.core.files : Content file] ************************************
ok: [gsd-tomcat1] => (item=/opt/tomcat/tomcat/conf/jmxremote.access)

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files_src.yml for gsd-tomcat1

TASK [Service] *****************************************************************

TASK [c2platform.core.service : Fact _services] ********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.service : Configure systemd service] *********************
ok: [gsd-tomcat1] => (item=tomcat)

TASK [c2platform.mw.tomcat : Manage service] ***********************************
ok: [gsd-tomcat1]

TASK [copy] ********************************************************************
ok: [gsd-tomcat1]

RUNNING HANDLER [c2platform.mw.tomcat : restart tomcat instance] ***************
changed: [gsd-tomcat1]

PLAY RECAP *********************************************************************
gsd-tomcat1                : ok=93   changed=7    unreachable=0    failed=0    skipped=86   rescued=0    ignored=0

  3. Implementeer het externe certificaat

    Simuleer de handmatige download

    sudo mv .ca/c2/tomcat/gsd-tomcat1-gsd-tomcat1.crt.saved .ca/c2/tomcat/gsd-tomcat1-gsd-tomcat1.rws-csp.crt

    vagrant provision gsd-tomcat1 | tee provision.log

    Let op de veranderingen in het bestand provision.log

    1. Genereer pkcs12-bestand
    2. Beheer Java KeyStore
    3. Kopieer naar controlenode (fetch)
    Toon me
    ==> gsd-tomcat1: Running provisioner: shell...
    gsd-tomcat1: Running: inline script
==> gsd-tomcat1: Running provisioner: ansible...
    gsd-tomcat1: Running ansible-playbook...
[DEPRECATION WARNING]: "include" is deprecated, use include_tasks/import_tasks
instead. See https://docs.ansible.com/ansible-
core/2.15/user_guide/playbooks_reuse_includes.html for details. This feature
will be removed in version 2.16. Deprecation warnings can be disabled by
setting deprecation_warnings=False in ansible.cfg.

PLAY [Tomcat] ******************************************************************

TASK [Gathering Facts] *********************************************************
ok: [gsd-tomcat1]

TASK [c2platform.core.server_update : include_tasks] ***************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/server_update/tasks/update_cache.yml for gsd-tomcat1

TASK [c2platform.core.server_update : Apt update cache] ************************
changed: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : include_tasks] *******************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=python3-pip)
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=upgrade pip and setuptools)
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=['setuptools', 'pyOpenSSL==22.0.0', 'psycopg2-binary', 'lxml', 'cryptography==38.0.4'])
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/bootstrap/tasks/package.yml for gsd-tomcat1 => (item=['nano', 'wget', 'tree', 'unzip', 'zip', 'jq', 'build-essential', 'python3-dev', 'python3-wheel', 'libsasl2-dev', 'libldap2-dev', 'libssl-dev', 'git', 'nfs-common', 'net-tools', 'telnet', 'curl', 'dnsutils', 'python2'])

TASK [c2platform.core.bootstrap : OS package] **********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : Custom command upgrade pip and setuptools] ***
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : PIP package] *********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.bootstrap : OS package] **********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.os_trusts : CA distribute ( Debian )] ********************
ok: [gsd-tomcat1] => (item=https://letsencrypt.org/certs/isrgrootx1.pem)
ok: [gsd-tomcat1] => (item=file:///vagrant/.ca/c2/c2.crt)

TASK [c2platform.core.secrets : Stat secret dir] *******************************
ok: [gsd-tomcat1 -> localhost] => (item=/home/ostraaten/git/gitlab/c2/ansible-gis/secret_vars/development)
ok: [gsd-tomcat1 -> localhost] => (item=/runner/project/secret_vars/development)

TASK [c2platform.core.secrets : Include secrets] *******************************
ok: [gsd-tomcat1] => (item=/home/ostraaten/git/gitlab/c2/ansible-gis/secret_vars/development)

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files.yml for gsd-tomcat1 => (item=marker)

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files_src.yml for gsd-tomcat1

TASK [c2platform.core.files : Link] ********************************************
ok: [gsd-tomcat1] => (item=/usr/bin/python → /usr/bin/python2)

TASK [c2platform.core.files : Lineinfile] **************************************
ok: [gsd-tomcat1] => (item=/home/vagrant/.bashrc)
ok: [gsd-tomcat1] => (item=/root/.bashrc)

TASK [c2platform.core.lcm : Ansible roles names without prefix] ****************
ok: [gsd-tomcat1]

TASK [c2platform.core.lcm : lcm_roles_node] ************************************
ok: [gsd-tomcat1]

TASK [c2platform.core.lvm : Get disks] *****************************************
ok: [gsd-tomcat1]

TASK [c2platform.core.lvm : Get usable devices] ********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.lvm : Get nodes lvm roles] *******************************
ok: [gsd-tomcat1]

TASK [c2platform.core.hosts : Set up /etc/hostname.] ***************************
ok: [gsd-tomcat1] => (item=/home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/hosts/templates/../templates/hostname.j2)

TASK [c2platform.core.hosts : Set up /etc/hosts.] ******************************
ok: [gsd-tomcat1] => (item=/home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/hosts/templates/../templates/hosts.j2)

TASK [c2platform.core.alias : Set fact node roles] *****************************
ok: [gsd-tomcat1]

TASK [c2platform.core.common : Remove custom prompt] ***************************
ok: [gsd-tomcat1]

TASK [Include role(s)] *********************************************************

TASK [c2platform.core.java : Set additional java facts] ************************
ok: [gsd-tomcat1]

TASK [c2platform.core.java : Install Java] *************************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/java/tasks/install.yml for gsd-tomcat1 => (item=jdk17)

TASK [c2platform.core.java : Check installed] **********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.java : Create etc profile] *******************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : test if tomcat_versions is set correctly] *********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_home is set correctly] *************
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_version is set correctly] **********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_user is set correctly] *************
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_group is set correctly] ************
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_catalina_opts is set correctly] ****
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_non_ssl_connector_port is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_ssl_connector_port is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_shutdown_port is set correctly] ****
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_ajp_port is set correctly] *********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if port collisions occur is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_jre_home is set correctly] *********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_service_state is set correctly] ****
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_service_enabled is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_address is set correctly] **********
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_enabled is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_directory is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_prefix is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_suffix is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : test if tomcat_access_log_pattern is set correctly] ***
ok: [gsd-tomcat1 -> localhost]

TASK [c2platform.mw.tomcat : Group] ********************************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : User] *********************************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Home directory] ***********************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Create home link] *********************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Stat bin dir] *************************************
ok: [gsd-tomcat1]

TASK [Include certs tasks] *****************************************************

TASK [c2platform.core.cacerts2 : Set fact cacerts2_certificates] ***************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : cacerts2_certificates] ************************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : Set various certificate facts] ****************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : Set fact cacerts2_certificates] ***************
ok: [gsd-tomcat1]

TASK [c2platform.core.cacerts2 : include_tasks] ********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/certs_group.yml for gsd-tomcat1

TASK [c2platform.core.cacerts2 : include_tasks] ********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/cert.yml for gsd-tomcat1 => (item=gsd-tomcat1)

TASK [c2platform.core.cacerts2 : Stat key] *************************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Stat crt] *************************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Stat dir] *************************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate an OpenSSL private key] **************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate an OpenSSL Certificate Signing Request] ***
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate an OpenSSL certificate] **************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Generate pkcs12 file] *************************
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Include Java KeyStore tasks] ******************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/java_keystore.yml for gsd-tomcat1

TASK [c2platform.core.cacerts2 : Stat KeyStore] ********************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Manage Java KeyStore] *************************
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : Create PEM file] ******************************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)]

TASK [c2platform.core.cacerts2 : include_tasks] ********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/cacerts2/tasks/certs/cert_deploy.yml for gsd-tomcat1 => (item=gsd-tomcat1)

TASK [c2platform.core.cacerts2 : Copy to control node ( fetch )] ***************
ok: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)] => (item=key)
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)] => (item=crt)
changed: [gsd-tomcat1 -> gsd-rproxy1(1.1.5.205)] => (item=keystore)

TASK [c2platform.core.cacerts2 : Stat parent dir] ******************************
ok: [gsd-tomcat1] => (item=key)
ok: [gsd-tomcat1] => (item=crt)
ok: [gsd-tomcat1] => (item=keystore)

TASK [c2platform.core.cacerts2 : Copy file] ************************************
ok: [gsd-tomcat1] => (item=key)
changed: [gsd-tomcat1] => (item=crt)
changed: [gsd-tomcat1] => (item=keystore)

TASK [c2platform.mw.tomcat : Configure conf/server.xml] ************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Configure conf/tomcat-users.xml] ******************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Configure bin/setenv.sh] **************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Stat manager] *************************************
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Configure webapps/manager/META-INF/context.xml] ***
ok: [gsd-tomcat1]

TASK [c2platform.mw.tomcat : Properties folder] ********************************
ok: [gsd-tomcat1] => (item=/opt/tomcat/tomcat/conf)

TASK [c2platform.mw.tomcat : Deploy WAR] ***************************************
ok: [gsd-tomcat1] => (item=https://github.com/aeimer/java-example-helloworld-war/raw/master/dist/helloworld.war → helloworld.war)

TASK [Files] *******************************************************************

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files.yml for gsd-tomcat1 => (item=jmx)

TASK [c2platform.core.files : Stat no update files] ****************************
ok: [gsd-tomcat1] => (item=/opt/tomcat/tomcat/conf/jmxremote.password)

TASK [c2platform.core.files : Content file] ************************************
ok: [gsd-tomcat1] => (item=/opt/tomcat/tomcat/conf/jmxremote.access)

TASK [c2platform.core.files : include_tasks] ***********************************
included: /home/ostraaten/git/gitlab/c2/ansible-dev-collections/ansible_collections/c2platform/core/roles/files/tasks/files_src.yml for gsd-tomcat1

TASK [Service] *****************************************************************

TASK [c2platform.core.service : Fact _services] ********************************
ok: [gsd-tomcat1]

TASK [c2platform.core.service : Configure systemd service] *********************
ok: [gsd-tomcat1] => (item=tomcat)

TASK [c2platform.mw.tomcat : Manage service] ***********************************
ok: [gsd-tomcat1]

TASK [copy] ********************************************************************
changed: [gsd-tomcat1]

RUNNING HANDLER [c2platform.mw.tomcat : restart tomcat instance] ***************
changed: [gsd-tomcat1]

PLAY RECAP *********************************************************************
gsd-tomcat1                : ok=93   changed=7    unreachable=0    failed=0    skipped=86   rescued=0    ignored=0

  4. Verifieer dat het geïmplementeerde certificaat het juiste / nieuwe certificaat is.

    Toon me
    vagrant@gsd-tomcat1:~$     echo -n | openssl s_client -connect gsd-tomcat1.internal.c2platform.org:8443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' > /tmp/gsd-tomcat1.pem
    openssl x509 -noout -fingerprint -sha256 -inform pem -in /tmp/gsd-tomcat1.pem
depth=1 CN = c2
verify return:1
depth=0 C = NL, ST = Zuid-Holland, L = Den Haag, O = C2, OU = C2 GIS Platform Team, CN = gsd-tomcat1
verify return:1
DONE
sha256 Fingerprint=B8:65:69:8B:8B:DF:94:5F:37:5C:CA:0F:04:EE:32:D2:2E:67:4D:04:D0:DF:38:1F:4F:DB:B6:54:02:78:63:B3
vagrant@gsd-tomcat1:~$ openssl x509 -noout -fingerprint -sha256 -inform pem -in /vagrant/.ca/c2/tomcat/gsd-tomcat1-gsd-tomcat1.
gsd-tomcat1-gsd-tomcat1.crt          gsd-tomcat1-gsd-tomcat1.keystore     gsd-tomcat1-gsd-tomcat1.rws-csp.crt
gsd-tomcat1-gsd-tomcat1.csr          gsd-tomcat1-gsd-tomcat1.p12
gsd-tomcat1-gsd-tomcat1.key          gsd-tomcat1-gsd-tomcat1.pem
vagrant@gsd-tomcat1:~$ openssl x509 -noout -fingerprint -sha256 -inform pem -in /vagrant/.ca/c2/tomcat/gsd-tomcat1-gsd-tomcat1.rws-csp.crt
sha256 Fingerprint=B8:65:69:8B:8B:DF:94:5F:37:5C:CA:0F:04:EE:32:D2:2E:67:4D:04:D0:DF:38:1F:4F:DB:B6:54:02:78:63:B3
vagrant@gsd-tomcat1:~$

Aanvullende Informatie

Voor aanvullende inzichten en richtlijnen:

  • Verken het ontwerp en de voordelen van deze setup in Implementatie van PKI voor RWS GIS met Ansible.
  • Bij RWS maakt de CA-server gebruik van een CIFS-share voor het opslaan van certificaten, wat enkele aanvullende handmatige stappen creëert omdat dit niet wordt ondersteund in Ansible Core Utility-modules, zie [Maak een eenvoudige CA-server met Ansible]({< relref path="/docs/howto/rws/ca" >}}).

Laatst gewijzigd 2024.11.13: nl translation C2-587 (fca5da9)